Mobile
Repairing Tools
Touch/Glass/OCA
Glass
Stencils &
IC
OCA Machine &
Parts
Mobile
Accessories
Software
OCA
Sheets &
Polarizers
The Mechanic C125-SK is a high-precision soldering iron tip designed specifically for the C210 series handle. It is favored by electronics repair professionals for its exceptional heat conductivity and its "S-shaped" (curved) knife geometry, which is ideal for micro-soldering and cleaning pads under SMD components. 1. Multi-Layer Construction The C125-SK utilizes a sophisticated plating process to ensure longevity and thermal efficiency: Copper Base: Provides high thermal conductivity for instant heat recovery. Iron Plating: Protects the copper from erosion caused by solder. Chrome Layer: Prevents "creeping" of the solder up the shaft of the tip. 2. "Plug-and-Play" Integrated Design Unlike traditional soldering irons where the tip slides over a ceramic heater, the C125-SK features an integrated heating element. This allows the station to read the temperature directly at the point of contact, resulting in: Heating from room temperature to 350°C in under 2 seconds. Minimal temperature fluctuation during continuous use. 3. The "SK" Edge The curved knife shape is a versatile "all-rounder" for micro-repairs: Flat Surface: Use the side of the knife to drag-solder multi-pin ICs. Pointed Tip: Use the very end for precision jumper wire placement. Curved Neck: Allows better visibility under a microscope compared to straight tips.Overview
Key Features
Specifications
Feature
Description
Product Model
Mechanic C125-SK (Knife Tip / Curved)
Compatibility
Exclusively for JBC C210, Sugon, T210, and Mechanic T210 Handles
Tip Shape
SK (Small Knife) – Featuring a 45-degree angle with a curved profile
Material Composition
Multi-layer plating: Oxygen-free Copper core, Iron plating, Nickel plating, and Chrome finish
Heating Core
Integrated Internal Heating (Tip and Heater are one unit)
Temperature Range
0°C – 500°C (Optimized for 350°C - 380°C)
Lead-Free
Yes, 100% Lead-Free compliant
Application
Logic board repair, jumper wires, IC cleaning, and Bridge removal
Total Length
Approximately 80mm
Usage & Maintenance Guidelines
Action
Recommendation
First Use
Tin the tip immediately upon first heating to prevent oxidation.
Cleaning
Use brass wool or a specialized tip cleaner. Avoid wet sponges if possible to prevent thermal shock.
Storage
Always leave a fresh blob of solder on the tip before turning off the station.
Oxidation Removal
Use a "Tip Refresher" paste if the tip stops "wetting" (holding solder).
| Weight |
0.015 kg |
|---|
Customer Reviews
No reviews yet
Be the first to review this product.